Water heaters are an essential part of our daily lives. Most of the time, we take them for granted. When you take a shower, brush your teeth, or wash the dishes, you are using water that has gone through a water heater.
One of the most important things to consider when buying a water heater is its capacity. The typical size of a water heater is 40 or 50 gallons. Though there are larger alternatives, these two types are widely used.
This article will focus on 40 vs 50 Gallon Water Heater as there are subtle yet important differences between these water tanks and determine which one will work best for your home.
Differences Between 40 and 50-gallon Water Heater
The differences between these two types of water heater are listed below
40-gallon water heaters take less time than 50-gallon heaters to heat up. The 40 gallons take up 30 to 40 minutes to heat 40°F water to 120°F, while the 50 gallons would take around 40 to 50 minutes.
A 40 gallon is easier and cheaper to install than a 50-gallon water heater because of its size and weight. It is easier to install a 40-gallon because the weight would be around 120 pounds, while the 50-gallon water heater weighs around 140 pounds.
The 40-gallon water heater is cheaper to operate than the 50-gallon because it uses less energy. A 40-gallon uses about 34,000 BTU of energy, while the 50 gallon uses about 36,000 BTU.
Another main factor is temperature control, meaning that the 40-gallon water heater is more energy-efficient when using less hot water. The 40-gallon water heater runs at a lower temperature because its heat production is less, which in turn increases the energy efficiency.
Recovery rate is the time it takes to heat water after you turn on your hot water. A 40-gallon heater can recover faster than a 50-gallon heater. The water heater takes around 30 minutes to recover while the 50-gallon takes around 1 hour and 20 minutes before producing hot water.
Advantages of 40 Gallon Water Heater
There are some benefits to a 40-gallon tank that you might want to know about.
Advantages of 50 Gallon Water Heater
There are some benefits to a 50-gallon tank that you might want to know about.
Disadvantages of 40 Gallon Water Heater
Disadvantages of 50 Gallon Water Heater
Which is Better for Your Home and Family Needs?
A 40-gallon gas water heater is an excellent investment for those who live in small spaces and are installed outside. If you have a large family or use a lot of hot water at once, you will need more gallons of hot water
A 50-gallon gas water heater is perfect for those who need more hot water to care for more significant needs such as laundry and bathing. A 50-gallon water heater is bigger and more potent than a 40-gallon gas water heater.
On average, a 40-gallon water heater is sufficient for a single person or a family of 2-4 people. On the other hand, if you have a family of 5-8 people, a 50 gallon water heater is the right choice for you.
The 40-gallon water heater is the best option for those who are on a tight budget. This type of water heater can be found at most retailers and is typically more affordable than its 50-gallon counterpart.
The 40-gallon model will usually heat up to 20 gallons before reaching its maximum capacity, which means that it's perfect for smaller homes with less demand for hot water. It also heats up quickly, meaning you don't have to wait for hours just to get warm enough showers in the morning!
However, a 50-gallon water tank will heat around 30 gallons or more which is beneficial for those who lead busy lifestyles, use multiple bathrooms, or just prefer feeling the liberty of using hot water now and often.
In this article, we have discussed about 40 vs 50 Gallon water heater and their differences, advantages and disadvantages pertaining to these two types of water heaters.
At last, we have outlined how you can choose between them to install and use in your home. We hope you can make an informed decision after reading this article and we wish you all the best in your water heater purchase.