Best Door Lock Installation Kit

It goes without saying that if you want the maximum amount of security in your home, you will have no other option than to get one of the well-performing and durable door locks for your front door.

However, getting one of them will not be enough. If you can not install them properly, you will not be able to get the most out of them.

And a lock that is not appropriately installed remains vulnerable, which is an easy target for burglars and intruders. For that reason, people highly recommend using the best door lock installation kit for setting them up.

With one of those at your disposal, you will be able to make sure that the locks are correctly installed. Alongside that, they will make the installation process a piece of cake for you too.

10 Best Door Lock Installation Kit

It might seem easy to get one of these. But you are going to struggle a lot while trying to get one that is going to be worth the money that you will have to spend on it. To make things easier for you, we have gone through the popular options in the market and picked the ones that we believe are worth recommending. They are:

1. DEWALT Kit D180005

DEWALT Kit D180005

One of the hardest parts of installing the lock on the door is drilling a hole in the frame. And DEWALT is set out to make that easy with this kit.

To start with, it combines most of the commonly used hole saws used for different purposes and puts them in a container. The holes that it comes with will enable you to get ten different sized cuts starting from ¾ inches to 2-1/2 inches. You might not have to opt for any other saw holes after getting this kit.

Aside from that, the hole saws have got patented teeth that will minimize the amount of chipping that occurs while making a hole. As a result, the lifespan of the units will be fifty percent higher than the average ones that different brands are offering in the market. You will be able to get extended use out of them.

Other than that, the units have a unique design that enables them to make cuts on dense woods. You can make deeper cuts on materials that are up to 2 inches thick in just one pass. Also, they have a fast plug ejection, which will let you easily remove the plug.

Lastly, the units boast high-speed steel edges. Those will enable you to cut through most of the materials effortlessly.

Pros

  • Combines ten different commonly used hole saws
  • Flaunts a patented teeth
  • Exceptionally durable
  • Features fast plug ejection mechanism
  • Can easily make deeper cuts

Cons

  • Cuts that these make are a bit rough
  • The 1-3/8 inches saw that it contains is not threaded

2. DEWALT Bi-Metal D180004

DEWALT Bi-Metal D180004

Are you looking for something that will clamp on to your door frame but will not damage the surface in this door lock installation kit reviews? DEWALT got your back in that regard with this unit.

First of all, it sports a design that is compatible with most of the standard lock sizes, from pocket size to big locks. You will be able to make it hold most of the locking mechanism without any issues. And the unit is capable of holding both metal and wooden doors. So, it will not be an issue for you to work with doors of different types either.

Other than the design, the hole saw that it includes feature construction of M3 steel. That material is well-known for being exceptionally durable, and the same thing can be said for this saw too. You can expect this to last for an extended amount of time without showing any signs of chipping or breakage.

Aside from the saw that it includes, it also comes with backing plates. These reinforced plates can resist warping exceptionally well. That reinforcement will enhance the overall lifespan of the entire kit even further. The bushings that are on the unit are adjustable too.

Alongside that, the c-clamp design that it features will allow you to clamp it without using any tools. It does not damage the surface either. Also, there is an alignment mechanism, which will make it easier for you to place it at an accurate height.

Pros

  • Works with most of the standard locking mechanisms
  • Included saw is of M3 steel
  • Comes with plenty of backing plates
  • Plates are highly resistant to warping
  • Features adjustable bushings

Cons

  • Some of the inserts are of flimsy plastic
  • Not that easy to adjust the bushings

3. Ryobi A99DLK4

Ryobi A99DLK4

Even though there are plenty of kits in the market, not all of them can really guarantee you a maximum amount of accuracy and precision. However, this one from Ryobi can.

To begin with, it comes in a kit of every relevant tool that you are going to need for installing a locking mechanism in your door. The package you will receive will have backsets, hole saws, and other essential parts that are required for the setup process. As a result, you will not have to purchase anything extra.

Apart from that, the backsets that it comes with has a dual adjustment mechanism. That will make it easier for you to align it in the exact position. Also, it has an auto-strike locator that will eliminate the need for manual measurement. You will not have to go through the hassle of measuring the distance with a measuring tape.

Other than that, the bits that it bundles with are Spade bits. They have an optimized design for different drilling angles. So, it will be pretty easy for you to get angled holes in your wooden workpiece. Also, the bits are exceptionally sharp, which will allow you to make holes faster.

Besides that, the auto-adjustment mechanism that it has will be able to deliver you a maximum amount of precision. As a result, you will be able to set up the locking mechanisms accurately.

Pros

  • Includes all of the essential parts
  • Comes with a dual adjustment mechanism
  • Offers a high amount of accuracy
  • Bundles with spade bits
  • Features an auto-strike locator

Cons

  • Does not work with doors that are 2-1/4 inches thick
  • Some of the parts are of low-quality plastic

4. Milwaukee 49-22-4073 Professional Door Lock Installation Kit

Milwaukee 49-22-4073 Professional Door Lock Installation Kit

Being able to offer easy access to the slots is quite essential for a unit to become the best door lock installation kit. And Milwaukee delivered that with this unit that they have brought out.

As we have mentioned, the unit will offer you quick access to the slot on the side. Because of having that quick access, you will be able to access the plugs using your hand tools pretty easily. This feature will allow you to save loads of time that you would have to spend on the preparation process.

Other than that, there is an anti-splinter depth stop. This stopping mechanism will prevent the bit from blowing through the door.

As a result, the holes that you are going to end up with will be smooth. And the looks that you are going to get after the setup process will be flush and will have a professionally-installed appearance.

Aside from that, you will not require any screws to set this kit up on your door. Instead of that, the clamp that it features onboard will hug tightly with your door, which will eliminate the need for fasteners.

Lastly, the unit's installation procedure is pretty simple and straightforward, thanks to the user-friendly design that it sports. You will be able to set it up in just two steps.

Pros

  • Easy to set up
  • Does not require any fastener
  • Offers quick access to the slots
  • Features a depth stop mechanism
  • Allows flush installation

Cons

  • Not ideal for making relatively large-sized holes
  • The clamping mechanism feels a bit flimsy

5. IVY Classic 27002

IVY Classic 27002

If you are generally planning to make simple holes on your wooden doors, you really do not need to look at the advanced units that are in this door lock installation kit reviews section. Instead, you should get something simple, such as this one that is being offered by IVY.

To start with, it comes in a set of three. And the three parts that it includes is more than enough for carrying out hole making tasks on wooden doors. It comes with a spade bolt, swift bore, and a hole saw. You are not going to need anything extra than what is included in this set.

Other than that, all of the parts that the set contains are of carbon steel. That material is quite famous for offering a high level of sturdiness, which is why the tools that it includes are exceptionally durable. These are extremely resistant to chipping and can resist warping reasonably well too.

Apart from that, the hole saw is 2-1/8 inches in size. Because of having that size, you will be able to make holes of varying sizes using it. And the mandrel that it comes with is 3/8 inches and is of D-type. That will make it easier for you to work with different types of wooden workpieces.

Alongside that, the bit of the set is exceptionally sharp. It will enable you to get quick and clean cuts on your project.

Pros

  • Comes in a set of three
  • All of the parts are of high carbon steel
  • Parts can resist warping exceptionally well
  • Includes a sharp bit
  • Included hole saw is 2-1/8 inches in size

Cons

  • Teeth of the saw are not that durable
  • Not ideal for making small-sized holes

6. IVY Classic 27003

IVY Classic 27003

On the lookout for a professional door lock installation kit but do not want to spend a chunk of money on getting one of them? Well, then you should definitely take a look at what IVY has to offer here.

Unlike some of the other sets, this one includes a template that has a guide. And to add a cherry on the top, the guide is fully adjustable. As a result, it will be pretty much effortless for you to make it align it on the exact position that you want to drill your holes at.

Other than that, the unit includes a snap-lock arm. This arm will allow you to select the width and set the exact measurement on the backset. For that reason, the holes you are going to make with this will be precise and accurate. And the hole saws that it comes with are of carbon steel, which makes them exceptionally durable.

On that note, you are going to receive two different hole saws. One of them will be 1 inch in size, and the other one will be 2-1/8 inches in size. You will even receive a D-type arbor. That will have a pilot drilling mechanism, which is going to make the handling process much easier for you.

Finally, the template that it comes along fits from 1-3/8 inches to 1-3/4 inches thick wood pieces.

Pros

  • Features an adjustable template
  • Sports snap-lock arms
  • Template fits on 1-3/8 to 1-3/4 inches thick wooden slabs
  • Includes two hole saws
  • Saws are of high-quality carbon steel

Cons

  • Teeth on the saws are a bit flimsy
  • A bit wide for some doors

7. MIBRO 300681

MIBRO 300681

A quick setup process is something that not all of the sets that are out there can offer. However, that is not the case for this kit that MIBRO is offering.

First of all, it features an EZ template, which is not really that common on the other offerings that are in the market. This template is reasonably easy to adjust. As a result, you will be able to hook this one up with your door in a small amount of time. You can save loads of time which you spend on the preparation process.

Aside from that, the template fits a plethora of doors. You can set this one up on the ones that are from 1-3/8 inches to 1-3/4 inches in thickness. The backset that it will snap on is from 2-3/8 inches to 2-3/4 inches. Also, adjusting it is a breeze. You will not have to go through any intricate steps for that.

Other than that, all of the parts that it comes with are of high-quality material. MIBRO has utilized high carbon steel, which does not only make these sturdy but also makes these exceptionally durable. These will last for a long amount of time without showing any performance issues.

And this set works with both the locking mechanisms that use standard bolts and deadbolts.

Pros

  • Easy to setup
  • Features an easily adjustable EZ template
  • Fits on most of the backsets
  • Works with locking mechanisms that use regular bolts and deadbolts
  • Constructed of high-quality material

Cons

  • Boasts a flimsy plastic part
  • Included bit does no work with steel doors

8. Milwaukee 49-22-4073 Polycarbonate

Milwaukee 49-22-4073 Polycarbonate

Though most of the kits that you will stumble upon will feature a construction of high-quality material, not all of them will have an auto-centering mechanism like this one that is being offered by Milwaukee.

Let us first talk about the most highlighting feature of the kit. It comes with an auto-centering guide. That will make it easier for you to align it at the exact position where you want to make your holes. There is an anti-splinter depth stop as well, which will stop the bit from blowing through the wooden workpiece.

Other than that, the hole saw that it comes with utilizes ice-hardened technology. This technology makes the saw considerably more durable than the units that the other kits include with their set. Also, you will not need to go through any hassle in setting this up either because it features a user-friendly design.

Alongside that, it offers quick access to the side slots. Because of that, you can easily access the plugs using your handy tools. You would not have to go through any hassles for that either. And it will allow you to save quite an amount of time as well.

Besides that, it comes with a clamp that will eliminate the need to use fasteners. You can set this one up in just two simple steps.

Pros

  • Features an auto-centering drill guide
  • Comes with an anti-splinter depth stop
  • Offers easy access to the slots on the side
  • Includes ice-hardened bits
  • Utilizes a unique clamp

Cons

  • Side slots feature a construction of cheap materials
  • Arbor is a bit hard to unscrew

9. IRWIN 3111001

IRWIN 3111001

Setting up installation kits on your doors does not have to be a difficult process. Well, IRWIN had factored that in when they were manufacturing this set for the crowd.

First of all, the overall design that the set sports are user-friendly. For that reason, it will be pretty much hassle-free for you to install this one on your doors.

In fact, it will only take four simple steps for setting this up properly. And the adjustable mechanisms that it has will make it easier for you to work with backsets of different sizes.

The kit comes included with a router bit. It also bundles with bolt plate templates and hinge templates. All of the parts that it contains are of carbon steel. For that reason, the durability level that these achieve is reasonably high. You will be able to use them extensively. And they will not chip, nor will they break that easily.

Apart from that, the jig that it sports has a self-centering mechanism. That mechanism will allow you to set this one with doors of varying sizes. You are not really stuck with one predefined door width.

Alongside that, the hole saws that it contains are reasonably sharp. You can cut through most of the dense wood with those pretty quickly. And the cuts that you are going to end up with will be clean and smooth.

Pros

  • Includes bolt plate templates and hinge templates
  • Features a self-centering mechanism
  • Sports sharp hole saws
  • Setup process is easy
  • Comes with a router bit

Cons

  • Teeth of the saw tend to bend pretty easily
  • Templates do not have a clamp

10. Disston E0101949 Blu-Mol

Disston E0101949 Blu-Mol

If you were on the lookout for a bi-metal lock kit, then you can conclude your search here because Disston has got the thing that you were looking for all this time.

To start with, it bundles with all of the things that you are going to require to carry out a bi-metal locking mechanism installation. You are going to receive a mandrel drill bit, one mandrel adapter, two different sized hole saws, and finally, one guide. That means you will not have to opt for anything extra if you get yourself this kit.

On that note, the hole saws that it bundles with are 1 inch and 2-1/8 inches in size. Because of having two of the different sized saws, it will be pretty easy for you to cut holes of different sizes on your wooden workpiece. As a result, you will be able to work with doors of various widths with this set.

Besides that, Disston did not skimp one bit on the material for the construction. They have sourced out high-quality materials and constructed the parts using that. For that reason, you will be able to expect these to have a long lifespan. These will not bend that easily either.

Alongside that, there is a self-adjusting mechanism on the guide. Because of that mechanism, it will be pretty easy for you to set this up. You will not have to waste that much amount of time in setting this one up.

Pros

  • Includes two different hole saws
  • Parts are of durable materials
  • Can resist chipping and bending exceptionally well
  • Features a self-adjusting mechanism
  • Easy to set up

Cons

  • Built-in guide moves around a lot during operation
  • A bit hard to get accurate cuts with it

Things to Check Before Getting One

Whether you are planning to use one of these extensively or whether you want to use them to finish small installation tasks, if you want to get the most out of the money you would spend, you have to keep few factors in mind. And they are as stated:

The Included Parts

More does not always mean better. First, you need to make sure that the set includes all of the essential parts that you will require for the process. And there will be sets that will only contain three versatile parts that are more than enough for fulfilling the installation tasks.

Door Lock Installation Kit

For that reason, we would recommend checking what comes in the box before you make a purchase decision.

Easy Slot Access

If you do not want to spend a lot of time in the preparation process, then you should consider whether the one that you are going for provides you easy access to the slots or not.

Door Lock Installation Kit

The ones that do offer that will enable you to access the side slots using your hand tools only. You will not need any other intricate tools, nor will you have to spend extra time on the preparational phase with those.

Depth Stop

Another important factor that you need to consider when you are purchasing these is the depth stop. The kits that come with a depth stop will make it easier for you to drill holes on your workpieces.

You will not have to be extra careful when you are handling the drill because that depth stop is going to prevent the bit from blowing into the door. Considering that, you need to put proper emphasis on this factor.

Clamp

Most of the units are going to utilize a screwing mechanism. Even though they do work great, they have a high tendency to leave scratches on the surface. And if you are working with a finished door, you would not want any blemishes on the surface, would you?

Door Lock Installation Kit

For that reason, we would recommend shooting for the ones that utilize a clamping mechanism.

Self-Centering Mechanism

One of the important things you have to factor in when you are making holes in your workpieces is accuracy. And getting accurately placed holes is something that is easier said than done. However, the ones with a self-centering mechanism can make it easier for you to get precise holes. So, we would highly suggest going for those.

Frequently Asked Questions

1. What is the best door lock installation kit?

There are loads of well-performing ones in the market. However, according to us, the DEWALT D180005 is the best overall pick. It includes highly durable hole saws. And it bundles with a durable container as well.

2. How do you install a door lock kit?

The setup process will vary from one kit to another. Nevertheless, for the ones that utilize the screwing mechanism, you will have to attach it using fasteners. However, for the ones that have a clamp, all you have to do is fit the clamp on edge and tighten it down.

3. What is the best door lock brand?

In our opinion, Baldwin and Kwikset offer high performing locking mechanism in the market. However, there are plenty of other well-performing ones out there.

4. How do you install a Milwaukee door lock kit?

Unlike some of the other kits, the Milwaukee does not require any fasteners. Instead of that, all you have to do is tighten the onboard clamp to the door. Make sure that it seats flush with the surface.

Final Words

If you really want to install the locking mechanism on your doors properly, there is really no substitute for the best door lock installation kit.

One of those will make carrying out the setup process feel like taking a walk in the park. And hopefully, we were able to make getting one easier for you.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: