Welding Table Height: How Tall Should It be and Why?
The perfect height gives you a comfortable, fatigue-free welding experience.
That said, there’s no universal height for these table. The average height of welding tables is around 36 inches. The perfect table height for you will depend on your body height, the types of projects you’re working one, and whether you prefer welding when standing or sitting.
We have done some research on how tall a welding table ought to be and found some helpful insights that we will discuss in details below.
How high should a welding table be?
As we have just mentioned above, there’s no one size fits all when it comes to welding tables. The perfect size for you will ultimately boil down to your specific body height.
That said, there are some average heights that have been developed by both welders and table manufacturers overtime to meet the needs of welders with different body heights.
Check our quick chart below for the average height of welding table for different welder body heights.
Ideal welding table height
5’3″ – 5’7″
5’7″ – 5’11”
6′ – 6’2″
39 to 40 inches
6’2″ and higher
As you can see, this table caters for different folks, including the short ones and tall ones.
There’s nothing wrong with creating your table with 1-2 inches higher or lower, if you want. But don’t go beyond that. Some welders would want to extend the height beyond average by up to 5 inches, but this is just not practical!
Remember that the wrong of choice of table can have serious effects on your welding projects as well as your body.
If you get a table that’s too low, you’ll find yourself hunching over to reach the worktop or see the puddle. This might feel like a normal strain for the first few times. But with time, it can result in severe backache as a result of the pain imposed on your lower back muscles whenever you lean forward builds up.
Keep in mind that when you lean forward, you’ll be moving with your body weight plus the weight of your protective gear and any equipment you’re holding such as the weld gun, clamps, materials, etc. That reminds me, we also have a write up on welding table clamp review.
A table that’s too high will also make you to strain your muscles. You’ll be forced to place your hands a bit higher and lift your head high to reach your project and you’ll most likely develop shoulder, upper arm, and neck pain.
Ultimately, the wrong choice of welding table will make you get fatigued quickly and affect your welding productivity.
How to know and measure welding table height?
Most people consider 36 inches to be the standard height for welding table and other working benches.
Now, you might be wondering how others usually arrive at 36 inches as the average height. Or how we came up with the average heights chart above.
We have already stated before that this mainly has something to do with your body height.
But it also something to do with the type of projects you’re working on. This factor results in a deviation from the average height as explained below.
If you’re handling easy work, then you can stick to the average height of 36 inches. This level of worktop will make you feel comfortable welding your work pieces and you can go for long hours without feeling fatigue.
If you’re handling small projects and want to be more detailed in your welding, you can bring up your table a bit higher, say up to 39 inches. This level brings the project closer to your eyes for more detailed welding. Most welders also agree that this is a perfect height for TIG welding.
If you’re doing heavy-duty welding, your table height should fall a bit lower than the average. In most cases, this should be around 31 inches. Though you can go even lower than this depending on the size and weight of materials you’re dealing with.
Tips for getting the perfect welding table height
When you’re coming up with your own welding table, you’ll have the opportunity to custom tailor it to your height needs. Likewise, the store welding tables come in various height options to let you choose one that matches your needs.
Whichever path you take, there are some helpful tips you should keep in mind to help you get the perfect height of table for your needs.
Determine your body height
As we mentioned at the beginning, the most important factor to consider when determining your welding table height is how tall you are.
The general rule of thumb here is to make sure your welding table top comes all the way up to your waistline or shirt cuff. That’s sure to make a comfortable welding table.
If you’re building your own table, be sure to account for the height of legs plus the top thickness when setting the table height.
Define what welding projects you plan to work on
If your project involves lifting heavy items, say cylinders, then getting a table that’s too high makes it a pain for you to lift your project all the way to the worktop.
You want to have your table a little lower to avoid getting fatigued quickly as you work on the demanding project.
Some welders might experience back pain and will have a hard time lifting stuff on onto a tall table.
If that’s your problem, you consider leaving space for accommodating all the equipment to help you work on your project, so you won’t be needing to lift anything when you get down to work.
And if you work on smaller project, there’s no problem in setting your table a bit higher to let you easily see the puddle and make your welds more accurate.
How about getting multiple tables?
If you’ve got the space in your garage or workshop, we suggest getting welding tables of various heights to allow you to work on various types of projects comfortably.
This is a great consideration if you always find yourself working on projects of various sizes and shapes.
You can consider having one table with the perfect height for standing when working on a project and one that lets you sit down when welding.
What if you don’t have sufficient space? In this case, a good solution would be to get a table that you can easily fit underneath the larger table.
What is your favorite welding position?
Some people choose to weld while sitting. Others prefer standing throughout the project. What’s your preference?
If you work when standing up most of the time, then you should use your waistline to buy or build a comfortable table that’s lets you weld for hours without getting fatigued.
And if you prefer sitting, then you’ll also need to get a chair that’s comfortable for you so that you can feel comfortable and fully focus on your welding projects.
Use any table in your office, home or workspace that you think offers you a comfortable working height and take its measurements. Then, you can use these measurements to choose or come up with your own ideal welding table to use when sitting.
Get a height adjustable welding table
An adjustable height welding table allows you to adjust its height to different levels. Sometimes you will need the height of tall welding tables and other times even the height of a oversized welding cart can do.
Such a table will prove to be a great investment for welders who usually work on projects that demand various levels of detail.
A single table that adjusts to different heights is more preferable to multiple tables of different heights and can help you save a good amount of cash and space.
Some of these adjustable tables are build light and you can easily adjust the height on your own. However, some are a bit heavier and you might need an extra pair of hands to lower or lift them.
Some tables come with the option of completely removing the legs so that you place the worktop on another existing table. This is also a great aspect as you can transfer the worktop to a table with a height that’s perfect for your body height for comfortable welding.
Account for the height of wheels
If you’re making your own table and want to include caster wheels, make sure you account for the height of the wheels.
Ignoring the little height increase the wheels bring can end up making your table a bit higher and make it uncomfortable to work with. This is especially true in case your table is fixed height.
If you decide to include the casters to your table along the way to make it easy to move around, then you might be forced to cut the legs a bit to ensure you don’t interfere with its current height.
You should also consider having your table run off the perfect height by 2-3 inches to ensure the ultimate comfort when working for long hours.
This additional height can give you the chance the thickness of table top that you prefer.
Dealing with heavier and taller projects
Sometimes you may not even need a welding table! One such exception is where you’re dealing with large scale projects that involve quite heavier and taller items.
Using a standard height table here will make it quite hard for you to lift the heavy items. Or it takes your taller items feets high that it becomes a challenge to work on them.
Well, you might still feel the need to have a table for the taller items. But it has to be made with lower height.
We suggest subtracting an inch from your table height for every inch your project gets above the 50-inch mark.
Get a welding table that offers you a comfortable working height if you want to work through your projects without getting quickly fatigued and losing focus on your projects. Your body height will play a huge role in the height of table you pick. The projects you work on will also influence your choice of table height. Using this helpful guide on welding table height, you should have an easy time determining the perfect height for your welding needs.